On the surface, these two companies might seem to have little in common. However, they do share one similarity: both offer fittings for different types of piping. The question is – are Parker and Swagelok interchangeable? Let’s find out if this was a simple case of false advertising or not.
Parker fittings are a type of fitting that can be found in many different industries. They are used for piping and tubing, boilers, heating systems, water systems, and more. Parker fittings are also used in plumbing.
Is Parker CPI™ Really Interchangeable? Yes. All threads, seal seat angles and positions, tube insertion depth, hex sizes and breadth, and so forth are Swagelok® compatible. The only essential difference between the two fittings is the fact that Swagelok® utilizes two ferrules while we use one.
Is it possible to reuse Swagelok fittings?
The ability to reuse the body without leaks is one of the numerous benefits of the Swagelok two-ferrule fitting system. You can’t reuse the nuts and ferrules if you’ve changed the system design, such as shifting a fitting to a new place or altering the tubing, but you can reuse the fitting bodies.
What are ferrule fittings and how do they work? The ferrule must be oriented appropriately in order to function properly—typically, the ferrule is positioned such that the longest sloping face of the ferrule faces away from the nut. As a consequence, the ferrule closes the gap between the pipe, nut, and receiving fitting, resulting in a secure connection.
What exactly are Swagelok fittings?
Swagelok is a privately owned worldwide corporation that specializes in the manufacturing and distribution of gas and fluid system components such tube fittings, valves, tubing, hoses, and gauges. It was started in 1947 by Fred A. Lennon in Cleveland, Ohio, and transferred to Solon, Ohio, in 1965, where it is now based.
What is the cost of tightening Swagelok fittings?
Tighten the plug one-quarter turn from the finger-tight point while keeping the fitting body stable. Tighten the plug one-eighth turn for 1/16, 1/8, and 3/16 inch. Tighten the plug one-quarter turn if the gap is more than 1 inch. Swagelok plugs may be disassembled and reassembled several times.
Answers to Related Questions
What is a yor Lok fitting, and what does it do?
Tee made of stainless steel
Ferulok® Steel fittings are tough and flareless, intended to bite into the tubing’s outer surface for leak-free couplings without distorting the internal tube diameter much. For a leak-tight installation, LET-LOK fittings seal and grasp the tube.
How do you join NPT fittings together?
Npt Fittings: How to Tighten Them
- Insert the male thread into the female fitting.
- In a clockwise motion, turn the male pipe thread.
- Continue turning the male pipe fitting clockwise until you can no longer do so, which may take anywhere from two to four complete rotations depending on the size and kind of fitting.
What is the monetary value of Swagelok?
According to Forbes, Lozick is worth $1.7 billion, based on his 65 percent ownership in Swagelok, a company with $1.8 billion in yearly sales, as well as additional cash, shares, bonds, and real estate.
Is it possible to reuse ferrules?
Once a ferrule has been compressed, it cannot be reused. This connection is put directly over the pipe, and the nut is tightened to compress the ferrule between the pipe and the fitting’s body. Any flexible fitting or coupler that has blown or ripped away from a hose may never be used again.
What is the best way to utilize the Swagelok gap inspection gauge?
When using the gauge, align it with the space between the nut and the body and gently push it in.
- The fitting has been correctly tightened if the space is too narrow for the gauge to penetrate.
- More tightening is required if the gauge fits into the gap.
Tubing connections are sealed in a variety of ways.
Mechanically (by flanging) or by brazing, the sleeve is permanently attached to the tube. The O-ring between the body and the flat face of the tube flange (or braze sleeve) is compressed when the nut tightens into the fitting body, forming a tight seal.
Swagelok is a compression fitting, right?
There are two ferrules on our compression fitting. The front ferrule forms a seal against the fitting body and the outer diameter of the tubing. The rear ferrule advances the front ferrule as the nut is rotated, providing a radially efficient tube grip. Reusability is possible because to our compression fitting ferrule technology.
What does VCR fitting stand for?
The two matching fittings establish a helium-leak tight connection on a metal gasket. VCR stands for Vacuum Coupling Radiation fittings. A dome-shaped bead on the front face of a VCR fitting, polished to a mirror-like shine, ensures excellent contact between the gasket and the fitting.
Who are Swagelok’s rivals?
McMaster-Carr, Barrett Steel, Dee Development Engineers, and Castle Metals are among Swagelok’s main rivals. Swagelok Company is a high-pressure fittings, regulators, valves, and tubing accessories manufacturer and supplier. McMaster-Carr is a provider of materials and supplies for maintenance, repair, and operations.
Swagelok is pronounced like this: Swagelok, Swagelok, Swagelok, Swagel
Swagelok is derived from the term “swaging,” which refers to the clamping method used by our nut and ferrule tube fittings. It has the same rhyming pattern as “aging.” We’ve heard anything from “Swedgelok” to “Swag-e-lock” to “Swag-lock.” Really, as long as you know who we are, you may pronounce it whatever you like.
What does the term “an fittings” mean?
Plumbing Basics – AN Fittings & Hoses. AN stands for Army-Navy. The size specifications were established by the military back in World War II. They were originally used in the aerospace industry. Each AN size refers to the outer diameter (o.d.) of the hose or tube that it’s used with.
What is the difference between fixtures and fittings?
Fixtures are objects that are ‘fixed’ to the property, while fittings are items that aren’t connected to the property by anything other than a nail or a screw (such as a picture or mirror, for example).
Should Teflon tape be used on brass fittings?
Teflon tape is used to seal threaded plumbing fittings, whether they are made of copper, brass, plastic, or steel. Brass to brass connections are about the only exception I can think of, and even then, teflon tape or pipe dope is occasionally required to seal it.
What’s the difference between compression and flare fittings?
Compression outlets are often utilized for water and compressed air connections where a little amount of leaking won’t create too much of an issue. Gas and high-pressure lines employ flared outlets because even a little leak may create big issues if left untreated.